Perforated aluminum foil for stabi ppr pipes
1.Coating material:Polypropylene,QF551
2.Application:PPR pipes
3.EN575/EN546
| Perforated aluminum foil for stabi ppr pipes |
| Aluminum Alloy |
3003, 8011, 8006(New!) |
| Temper |
HO |
| Specification |
Al Thickness |
0.12mm, 0.15mm |
| Coating Thickness |
40/50 microns on one side or both sides |
| Total Thickness |
0.20mm, 0.23mm |
| Width |
4-1350mm |
| Core |
150-152mm (aluminium or paper core) |
| O.D. |
850mm |
| Hole Diammeter |
2.5mm, 3.5mm |
| Coating material: |
polypropylene copolymer (type ADMER QF551 from company Mitsui) |
| Coating Density: |
0.890 g/cm3 |
| Peel strength |
> 6 N/15mm |
| Tensile strength |
125 - 165 N/mm2 |
| Elongation |
> 13% |
| Application |
Stabi PPR pipe |
| Packing |
Wooden pallet sutiable for long distance sea transportation |
More information for perforated aluminum foil for stabi ppr pipes
1. Details
2. Propertities:
Our aluminium strip based on a new generation of materials for multilayer pipes offer outstanding advantages such as:
l Excellent roll forming and welding;
l Properties (for TIG, laser and overlap or butt welding) ;
l High strength combined with high elongation;
l Extrmely consistemt material characteristics;
l Good adhesion between aluminum and polyethylene due to special chemical degrease.
The coating line, specialized in film coating.
The slitting line, desined for slitting of narrouw and thin coils in soft conditions, ensures:
l No sticky windings and no staining;
l Less manipulation after sltting, less risk for damage and contamination;
l Uniform tension throughout the whole cil via most accurate control systems;
l Consistent slit edge quality due to accurate tooling: very low burr and edge deformation results in stable behaviour during the process.
Your message must be between 20-3,000 characters!
